Product Description
Starter Motor for Ive-Co 5 861049
Starting Motor
A starter is a device used to rotate an internal combustion engine in order to initiate the operation of the engine under its own power. The starter can be electric, pneumatic, or hydraulic. In the case of, for example, oversized engines or diesel engines in agricultural or excavation applications, the starter can also be another internal combustion engine. Internal combustion engines are feedback systems that, once started, rely on the inertia of each cycle to start the next cycle.
How A Starter Motor Works
It Can Be Explained By The Working Principle Of Its Main Component, The DC Motor. A DC Motor Is A Device That Converts Electrical Energy Into Mechanical Energy. It Is Based On The Principle That A Charged Conductor Is Subjected To Electromagnetic Force In A Magnetic Field. Because The Torque Generated By One Coil Is Too Small And The Speed Is Unstable, In Fact, There Are Many Coils Wound On The Armature Of The Motor, And The Number Of Commutation Pieces Also Increases Correspondingly With The Increase Of Coils. So As To Ensure Sufficient Torque And Stable Speed.
Notice
The Starting Time Of The Starter Motor Should Not Be Too Long Each Time, Generally Speaking, About 10 Seconds Is The Best. The Time Interval Between Starting The Motor Twice Is About 1 Minute, Preferably Greater Than 1 Minute. If It Cannot Be Started Three Times In A Row, The Engine, Battery, Circuit Lines, And Connection Points Should Be Checked At This Time.
For A Starter Motor Without An Overcurrent Protection Device, If It Cannot Be Started Three Times In A Row, The Starter Motor Must Be Stopped At This Time, Because The Starting Current Is Too Large, And The Starter Motor Will Overheat Due To Excessive Current During Long-Term Work; If You Continue To Forcibly Start The Motor, The Motor Will Most Likely Burn Out.
After Replacing The Starter Motor, You Should Pay Attention To The Contact Points Of The Positive And Negative Poles. It Is Best To Polish The Contact Points And Install Them Firmly, Otherwise, It Will Cause The Problem That The Engine Will Not Start When It Is Hot.
Product Parameters
| Product Name | Starter Motor |
| Keywords | Starting Motor |
| Brand | Neutral or Nitel |
| Voltage (V) | 24 |
| Kilowatt (Kw) | 4 |
| Teeth | 9 |
| Rotation | CW |
| Used on | for Iveco |
| Weight | Standard |
| Material | Metal |
| Certification | ISO/Ts16949 |
| Application | Iveco |
| Condition | 1 |
| Cargo 113183, 116347 | |
| CAS CST10661AS | |
| Delco 19084034 | |
| FIAT 75114529 | |
| Iveco 5 | |
| Motorherz STB3183WA | |
| WAI 19664N | |
| WPS 18030N, 19664N | |
| ZAUFER 300N11909Z |
FITS FOR
| FITS FOR | IVECO 109-14 5.5 [8060.04.689] 06.1983-12.1985 |
| IVECO 109-14 5.9 [8060.05.289] 11.1985-03.1991 | |
| IVECO 75 E 14 4.0 [8040.45.4000TCA] 01.1991- | |
| IVECO 79-13 5.5 [8060.04.060] 11.1979-12.1983 | |
| IVECO 79-14 5.5 [8060.04.660] 01.1983-11.1985 | |
| IVECO 79-14 5.9 [8060.05.280] 12.1985-03.1991 | |
| IVECO 95-14 5.5 [8060.04.669] 07.1983-10.1985 | |
| FIAT TRUCK 80 NC 1972-1980 8060.02/ | |
| FIAT TRUCK 90 F13 1978-1982 8060.04.055 |
Detailed Photos
About Us
Founded In 2571, ZheJiang CHINAMFG Electromechanical Co., Ltd. Is An Excellent Starter, Alternator, And Parts Supplier. Our High-Quality Motors Are Used In Heavy trucks, Mechanical, And Marine Engines. The Company Is Located In HangZhou ZheJiang , A National Historical And Cultural City Known As “The North Water City Of The Yangtze River”, With Convenient Transportation.
Since Its Establishment, The Company Has Formed A Perfect Product Structure, With More Than 10 Series Of Starter Motors And Alternators, And More Than 1000 Models. The Company Has Domestic Advanced Starter Motors, Alternator Production Lines, Complete Technical Equipment, And An Annual Production Capacity Of 500,000 Sets. The Main Products Are The Bosch Series, CHINAMFG Series, CHINAMFG Series, Prestolite Series, CHINAMFG Series, And So On. Our Products Are Suitable For All Kinds Of Engines And Trucks, Such As CHINAMFG Engines, CHINAMFG Engines, CHINAMFG Engines, CHINAMFG Power Engines, CHINAMFG Engines, CHINAMFG Engine, ZheJiang Diesel Engines, HangZhou Diesel Engines, Medium Heavy Automobiles, Freighter Trucks, International Truck, Etc.
The Products Have Been Exported To Russia, Spain, South Korea, Germany, The United Kingdom, The United States, Canada, Brazil, Argentina, India, Saudi Arabia, Pakistan, Kazakhstan, South Africa, Vietnam, Cambodia, And Other Countries.
FAQ
Q1:Are You A Manufacturer?
A: Yes, We Are A Starter Motor Manufacturer/Factory.
Q2: How Much Does The Sample Cost?
A: Please Contact Our Sales Staff And Tell Them The Model You Need, And They Will Check The Sample Cost For You (Some Are Free). And The Customer Pays The Delivery Cost.
Q3: How To Get A Quotation?
A: Please Suggest One Number Or Picture, Quantity, Etc., And Then Send Your Email To Us Or Talk To Our Staff Through The Trade Manager.
Q4: What Is The Minimum Order Quantity?
A: If We Have Stock, There Is No Minimum Order Quantity Limit. If Not, Please Contact Our Sales Staff, Different Items Are Different.
Q5: What About Your Service?
A: Timely. Be Careful. Before The Sale, We Will Use Our Software To Check The Correct OE Number To Avoid Errors. After Sending, We Will Track The Product For You Every Two Days Until You Get The Product.
Q6: Do You Test All Your Goods Before Delivery?
A: Yes, We Have 100% Test Before Delivery
Q7: How Do You Make Our Business Long-Term And Good Relationship?
A:1. We Keep Good Quality And Competitive Prices To Ensure Our Customers Benefit ;
2. We Respect Every Customer As Our Friend And We Sincerely Do Business And Make Friends With Them, No Matter Where They Come From.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| After-sales Service: | Free Replacement for Quality Problems Within 1 Yea |
|---|---|
| Warranty: | 1 Year |
| Car Make: | for Iveco |
| Engine Type: | 100% OEM Replacement |
| Control System: | Electromagnetic-Operated |
| DC Form: | Common Starter Motor |
| Samples: |
US$ 50/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
|
|
|---|
What are the main components of a DC motor, and how do they contribute to its functionality?
A DC (Direct Current) motor consists of several key components that work together to enable its functionality. Each component plays a crucial role in the operation of the motor. Here’s a detailed explanation of the main components of a DC motor and their contributions:
1. Stator:
The stator is the stationary part of the motor. It typically consists of permanent magnets or electromagnets that produce a fixed magnetic field. The stator’s magnetic field interacts with the rotor’s magnetic field to generate the required torque for motor rotation. The stator provides the foundation for the motor’s magnetic field and contributes to its overall stability and efficiency.
2. Rotor:
The rotor is the rotating part of the motor and is connected to the motor’s output shaft. It contains coils or windings that carry the armature current. The rotor’s windings interact with the stator’s magnetic field, resulting in the generation of a mechanical force that causes the rotor to rotate. The rotor’s movement is responsible for converting electrical energy into mechanical motion, enabling the motor to perform its intended function.
3. Armature:
The armature is the core of the rotor that holds the armature windings. The armature windings are typically made of copper wire and are evenly spaced around the armature. When a current passes through the armature windings, a magnetic field is created around them. This magnetic field interacts with the stator’s magnetic field, resulting in the generation of a torque that drives the rotor’s rotation. The armature is a critical component that facilitates the conversion of electrical energy into mechanical energy.
4. Commutator:
The commutator is a cylindrical ring attached to the rotor shaft. It consists of multiple segments, usually made of copper, that are insulated from each other. The commutator plays a vital role in the DC motor’s operation by providing the necessary electrical connections to the armature windings. As the rotor spins, the brushes make physical contact with different commutator segments, effectively reversing the direction of the current in the armature windings at the appropriate timing. This reversal of current flow ensures that the torque generated in the armature windings is always in the same direction, allowing for continuous rotation of the rotor.
5. Brushes:
The brushes are stationary contacts that make physical contact with the commutator segments. They are typically made of carbon or graphite and provide electrical connections to the armature windings. The brushes supply the current to the armature windings through the commutator, allowing for the creation of the magnetic field necessary for motor operation. The brushes need to maintain proper contact with the commutator to ensure efficient electrical transmission and reliable motor performance.
6. Housing or Frame:
The housing or frame of the DC motor encloses and supports all the internal components. It provides structural integrity, protects the motor from external elements, and helps dissipate heat generated during operation. The housing or frame also serves as a mounting point for the motor, allowing it to be securely installed in various applications.
By understanding the main components of a DC motor and their contributions, one can gain insights into how each part works together harmoniously to achieve the desired motor functionality.
Can DC motors be used in renewable energy systems, such as wind turbines or solar tracking systems?
Yes, DC (Direct Current) motors can be effectively used in various renewable energy systems, including wind turbines and solar tracking systems. The unique characteristics and advantages of DC motors make them well-suited for these applications. Here’s a detailed explanation of how DC motors can be utilized in renewable energy systems:
1. Wind Turbines:
DC motors can be employed in wind turbines to convert the mechanical energy of the wind into electrical energy. There are two common configurations:
a. Direct Drive Wind Turbines:
In direct drive wind turbines, the rotor of the turbine is directly connected to a DC generator. The rotor’s rotational motion is transmitted directly to the generator, which produces DC electrical power. DC motors can be used as DC generators in this configuration. The advantage of using DC motors/generators is their simplicity, reliability, and ability to operate efficiently at variable speeds, which is beneficial in varying wind conditions.
b. Hybrid Wind Turbines:
Hybrid wind turbines combine both aerodynamic and electrical conversion systems. In this configuration, DC motors can be utilized for the pitch control mechanism and yaw control system. The pitch control mechanism adjusts the angle of the turbine blades to optimize performance, while the yaw control system enables the turbine to align itself with the wind direction. DC motors provide precise control and responsiveness required for these functions.
2. Solar Tracking Systems:
DC motors are commonly employed in solar tracking systems to maximize the efficiency of solar panels by optimizing their orientation towards the sun. There are two main types of solar tracking systems:
a. Single-Axis Solar Tracking Systems:
Single-axis solar tracking systems adjust the inclination of solar panels along a single axis (typically the east-west axis) to track the movement of the sun throughout the day. DC motors can be used to drive the rotation mechanism that adjusts the panel’s tilt angle. By continuously adjusting the panel’s position to face the sun directly, the solar energy harvested can be significantly increased, resulting in higher energy output compared to fixed solar panel installations.
b. Dual-Axis Solar Tracking Systems:
Dual-axis solar tracking systems adjust the inclination of solar panels along both the east-west and north-south axes to track the sun’s movement throughout the day and throughout the year. DC motors are utilized in the rotation mechanisms for both axes. This type of solar tracking system provides the highest possible energy yield by keeping the solar panels perpendicular to the sun’s rays at all times, maximizing the exposure to sunlight.
DC motors are preferred in renewable energy systems due to their advantages, including:
- Efficiency at Variable Speeds: DC motors can operate efficiently at varying speeds, making them suitable for applications with fluctuating wind speeds or changing solar angles.
- Control and Precision: DC motors offer precise control and responsiveness, allowing for accurate tracking and adjustment in wind turbines and solar tracking systems.
- Reliability: DC motors are known for their reliability, with fewer moving parts compared to other motor types, reducing the risk of failure in remote or harsh environments.
- Compatibility with Energy Storage Systems: DC motors can easily be integrated with energy storage systems, such as batteries or supercapacitors, to store excess electrical energy generated by wind turbines or solar panels.
In conclusion, DC motors can be effectively utilized in renewable energy systems such as wind turbines and solar tracking systems. Their efficiency, control capabilities, reliability, and compatibility with energy storage systems make them a suitable choice for these applications, contributing to the advancement of sustainable energy generation.
Are there innovations or emerging technologies in the field of DC motor design?
Yes, there have been several innovations and emerging technologies in the field of DC (Direct Current) motor design. These advancements aim to improve the performance, efficiency, reliability, and overall capabilities of DC motors. Here’s a detailed explanation of some notable innovations and emerging technologies in DC motor design:
1. Brushless DC Motors:
One significant advancement in DC motor design is the development and widespread adoption of brushless DC motors (BLDC motors). Unlike traditional DC motors that use brushes for commutation, BLDC motors employ electronic commutation through the use of permanent magnets and motor controller circuits. This eliminates the need for brushes, reducing maintenance requirements and improving overall motor efficiency and lifespan. BLDC motors offer higher torque density, smoother operation, better speed control, and improved energy efficiency compared to conventional brushed DC motors.
2. High-Efficiency Materials:
The use of high-efficiency materials in DC motor design has been an area of focus for improving motor performance. Advanced magnetic materials, such as neodymium magnets, have allowed for stronger and more compact motor designs. These materials increase the motor’s power density, enabling higher torque output and improved efficiency. Additionally, advancements in materials used for motor windings and core laminations have reduced electrical losses and improved overall motor efficiency.
3. Power Electronics and Motor Controllers:
Advancements in power electronics and motor control technologies have greatly influenced DC motor design. The development of sophisticated motor controllers and efficient power electronic devices enables precise control of motor speed, torque, and direction. These technologies have resulted in more efficient and reliable motor operation, reduced energy consumption, and enhanced motor performance in various applications.
4. Integrated Motor Systems:
Integrated motor systems combine the motor, motor controller, and associated electronics into a single unit. These integrated systems offer compact designs, simplified installation, and improved overall performance. By integrating the motor and controller, issues related to compatibility and communication between separate components are minimized. Integrated motor systems are commonly used in applications such as robotics, electric vehicles, and industrial automation.
5. IoT and Connectivity:
The integration of DC motors with Internet of Things (IoT) technologies and connectivity has opened up new possibilities for monitoring, control, and optimization of motor performance. By incorporating sensors, actuators, and connectivity features, DC motors can be remotely monitored, diagnosed, and controlled. This enables predictive maintenance, energy optimization, and real-time performance adjustments, leading to improved efficiency and reliability in various applications.
6. Advanced Motor Control Algorithms:
Advanced motor control algorithms, such as sensorless control and field-oriented control (FOC), have contributed to improved performance and efficiency of DC motors. Sensorless control techniques eliminate the need for additional sensors by leveraging motor current and voltage measurements to estimate rotor position. FOC algorithms optimize motor control by aligning the magnetic field with the rotor position, resulting in improved torque and efficiency, especially at low speeds.
These innovations and emerging technologies in DC motor design have revolutionized the capabilities and performance of DC motors. Brushless DC motors, high-efficiency materials, advanced motor control techniques, integrated motor systems, IoT connectivity, and advanced control algorithms have collectively contributed to more efficient, reliable, and versatile DC motor solutions across various industries and applications.
editor by CX 2024-04-19